Technical equipment
25 MN Large-Scale Testing Machine for Structural Members
25 MN Large-Scale Testing Machine for Structural Members
The servo-hydraulic 25-MN large-scale testing machine is one of the most
powerful pieces of equipment in Europe. Indeed, the combination of its test
area, test clearance and maximum force may be unique.
Impact Testing Machine
Impact Testing Machine
The servo hydraulic 1000 kN Impact Testing Machine was developed to test
structural members under impact load. The test facility is equipped with high
quality control and a powerful servo valve.
The following load cases can be performed:
Due to the huge test area full scale tests can be performed. Two different hydraulik cylinders with a maximal test force of 1000 kN or 630 kN and a maximal velocity of the Piston rod of 4.5 m/s or 8.5 m/s can be installed in the test setup.
Universal large-scale test rig
Universal large-scale test rig
The universal test rig is primarily of use in the assessment of the bearing
capacity of large steel and reinforced concrete building elements, including
dismantled bridges and their components.
Dynamic test rig
Dynamic test rig
This test rig is used to study the dynamic behaviour of railways.
Division VII.2
Dr.-Ing.