Inpact on a reinforced concrete slab
The servo hydraulic 1000 kN Impact testing machine was developed to test structural members under impact load. The test facility is equipped with high quality control and a powerful servo valve.
The following load cases can be performed:
Due to the huge test area full scale tests can be performed in many cases.
One of two different cylinders with a maximal test force of 1000 kN
respectively 630 kN can be installed in the test setup. The maximal velocity of
the piston rod is 4.5 m/s or 8.5 m/s respectively.
The solid load frame guaranteed a trouble-free closed loop control und a
transfer of the control variable to the specimen.
Velocity of the piston rod versus test force
| Test conditions | 630 kN cylinder | 1000 kN cylinder |
|---|---|---|
| Velocity of the piston rod | max. 8.5 m/s | max. 4.5 m/s |
| Displacement of the piston rod | max. 500 mm | max. 250 mm |
Dimensions of the test items
(Maximal) width 3.0 m; height 2.6 m; length 8.0 m
Bearings
Clamped, simply supported, hydraulic clamping jaws for tension tests up to 600
kN
Division 7.2 Buildings und Structures | Testing facilities of the Division 7.2 | BAM Equipment and facilities
